5G is one of the latest innovations in the telecommunications industry. It has been touted as the fifth generation telecoms technology that will ensure faster and more efficient internet services. Despite these benefits, there have been questions about its safety for human use.
EMF meters can measure 5G. 5G emits radiofrequency waves, which are also emitted in some wireless devices. However, because the frequencies emitted by 5G may be higher, EMF meters used to measure them must have high frequencies.
The introduction of 5G has given rise to a lot of discussions about its effect on people using it. While proponents of the innovation argued that there is nothing to worry about, some health practitioners and EMF advocates believe that a lot of harm can come to humans from using the 5G technology through the EMF radiations emanating from it.
5G Network Technology
5G is the fifth generation of mobile networks and a step up from the current widely-used 4G LTE networks. 5G networks, like other mobile wireless networks, deliver internet connectivity to mobile devices via the air, which results in flexible internet service for its users. These wireless services are deployed through wireless base stations that serve the area surrounding the station.
5G Internet involves attaching small cell antennas or “nodes” to fiber networks. These nodes then transmit digital data to your home router. From there, your Wi-Fi modem transmits the data directly to your devices. Suppose the number of antennas or nodes in a specific area is not enough to serve the population in such an area. In that case, the 5G Internet will transmit weak signals and experience network congestion.
The 5G network can handle thousands of devices’ traffic, which makes it about ten times faster than the 4G. However, 5G can be dangerous to our health. If you want to know why it is not worth it yet, check out my in-depth article here!
The following are some of the reasons why 5G network technology was established:
- To ensure constant and reliable network service
- To accomplish a wider and inclusive network coverage
- To effect a wider device connection
- To have an increment in data transfer capacity per unit zone
- To accomplish up to 10GBps connection rates to devices
- To ensure a considerable energy efficiency
5G and EMF Meters
5G is a product of advancements in technology. The internet technology is one that promises faster and more efficient internet network provision. Using various bands of radio frequencies, the frequencies in the 5G network are divided into three, namely; high, middle and low frequencies.
Some of the features that determine the characteristics and nature of each frequency includes speed, bandwidth size and maximum number of allowable users. For instance, the low-frequency band has the lowest speed, while the middle- and high-frequency bands have more simultaneous users and higher bandwidth.
These frequencies determine if EMF meters will be able to measure 5G networks or not. EMF meters get their reading from the frequencies emitted from devices. These frequencies are thus converted to quantities which are then read.
How Do EMF Meters Measure 5G Network?
As said earlier, 5G uses different frequencies ranging from low to medium to high frequencies. As of this moment, 5G network technology that is being deployed uses only low and medium frequencies. These frequencies range from 700 MHz to about 6 GHz.
At these frequencies, most EMF meters will be able to measure the 5G network effectively. However, plans to deploy 5G technology using higher frequencies are still in the pipeline and may occur soon. When that happens, makers of EMF meters will have to increase the meters’ capacity to encompass the higher frequencies.
Summarily, the ability of an EMF meter to measure the EMF radiation produced by the 5G network is dependent on the capacity of the meter.
Types of EMF Meters
Since we have concluded that an EMF meter’s ability to measure 5G depends on its capacity, it is important to know the different types of EMF meters based on their capacity. This knowledge will help determine the type of meter that can be used to measure 5G.
The following are the types of EMF meters based on their measuring capacity:
- Low-Frequency Meters
- High Frequency Meters
- Multi-frequency Meters
1. Low-Frequency Meters
This type of EMF meter, as the name suggests, measures EMFs of low frequency. These frequencies are produced by small appliances, lights, and speakers. In most cases, the frequency ranges from 16 Hz to 100 KHz. The movement of these frequencies is usually spherical and does not move far from its source in most cases, except when there is high intensity.
There are two types of low-frequency EMFs. This classification is based on the source of the radiation. AC electric fields are produced from electrical and wireless devices. These fields are produced at all times, even when the appliances are not turned on.
AC magnetic field is the second type of low-frequency EMF radiation. This type of field is produced when electrical appliances are powered and in use.
The Cornet ED is an effective low frequency meter that you should get if you are looking to buy a low frequency EMF meter. This meter provides an encompassing measurement of EMF by measuring both the AC electric and AC magnetic frequency effectively.
2. High-Frequency Meters
This is the direct opposite of low-frequency meters. These meters can be used to measure high frequencies within the range of 800 MHz and 8GHz. These types of frequency are generated from wireless devices, gadgets, and similar technologies. Laptops, mobile phones, WIFI Routers, and other wireless devices rank top among gadgets that emit EMFs of high frequency.
An example of a high frequency meter is the TriField EMF Meter. This meter is a high-frequency EMF meter that is capable of measuring all the three types of EMF radiation. The meter gives accurate readings when measuring AC Electric, AC Magnetic and Radiofrequency, including 5G network. The meter has an indicator that shows EMF hotspots around you.
3. Multi-Frequency Meters
This class of EMF meters stands as a hybrid between the low- and high-frequency meters. This type of EMF meter can be used to measure EMFs of both low and high frequency. The meter is most suitable for people who are just testing for a new area.
Out of the three types of EMF meters, the high and multi-frequency meters seem like the best option if you wish to measure EMF radiations from the 5G network.
The Advanced GQ EMF-390 is a top-notch multi-frequency EMF meter that you can get. The meter features numerous high sensitivity sensors that helps you detect radiations from cellphones, power lines and other sources of EMF. Also, the meter is equipped with a technology that helps you identify the source of a radiation during detection. You can measure 5G network and RF radiations with frequencies up to 10 GHz.
Why Should I Get an EMF Meter For 5G?
There are many reasons you should get an EMF meter in this era of 5G network technology. An EMF meter that can detect and measure 5G network is very important, if you want to stay safe. There have been a lot of health risks associated with the use of 5G networks, and owning an EMF meter that can measure 5G networks efficiently is an important way of protecting yourself against these dangers.
The following are the ways through which an EMF meter will protect you against dangers associated with 5G
Maintaining distance from 5G stations
It is essential that you keep a safe distance from 5G stations in order to stay safe from the EMF radiations from it. As a result, you need an EMF meter that can effectively measure and detect EMF radiations so as to identify the station and maintain your distance from them.
Protect Your Home
It is important that our homes are well protected from 5G radiations. This is because the home should be the safest place for an individual and as such, all efforts should be directed towards ensuring that the incidence of 5G radiations is reduced to the barest minimum.
However, it will be a bit difficult to ensure that the home is well protected if the radiation cannot be detected and measured. If you want to know more about EMF radiation around your home, check out my article about How To EMF Proof Your Home In 4 Steps.
These are some of the reasons why you need to get an EMF meter that is strong enough to detect and accurately measure 5G networks.
One of the interesting advantages of 5G technology is that it promises faster and more efficient internet services for users. While this sounds like good news for everyone, health and medical practitioners are raising concerns about the adverse effects of the technology on human health.
To validate these concerns, one needs to measure the EMF radiations emitted by 5G technology. The use of EMF meters in measuring 5G technologies depends on the measuring capacity of EMF meters. 5G uses low and medium frequencies at the moment, which means that in order for an EMF meter to effectively measure 5G it must have the capacity of measuring the low and high frequencies up to 6GHz.